For the House and Cottages

Here is what the craftsman did in the country from an old kettle and pipes. My admiration!

Pin
Send
Share
Send
Send


Wrongly think those that the fountain should be a classical construction with a stream of water, beating up or to the side. It turns out that old utensils and unnecessary kitchen utensils are perfect for making a fountain or a birdbath.

How to do it? First of all, you need to install a durable block base, for example, a barrel to which two pipes are attached: one above to install the kettle, and the other below under the plate. The lower pipe will also serve as a stand for the plate, as well as water will flow from the plate into the barrel.

Then a hole is made in the bottom of the metal kettle. Through this hole, the teapot is strung at an angle onto the upper metal tube.

On top of the bottom pipe is a metal stand in the form of a small cross to support the plate. It remains only to install the workpiece in a barrel, connect the pump for the fountain and fill the barrel with water.

A fountain turns fantastic, which you can watch tirelessly endlessly.

Pin
Send
Share
Send
Send